exclusiv system
Interior Window Sill
Classic Element for
Commercial Construction
Key Benefits
- WERZALIT material
- 3 different surface structures
- A total of 16 decors
The Original Solution
The exclusiv system window sill with drop-nose is perfect for fitting out new buildings or as an easy-to-install solution for renovating window sills in need of repair. The drop-nose makes it ideal for installing overtop existing window sills. It can also be equipped with integrated radiator panelling or installation and cable channels.
exclusiv system 65
exclusiv system 100
exclusiv system 140
| Standard Lengths: | 6000 mm |
| Width: | 100, 150, 200, 250, 300, 350, 400, 450, 500, 550 mm |
| Panel Height: | 65, 100, 140 mm |
Price Group|, Surface: Smooth, Semi-Gloss
| white | 001 |
| creme | 167 |
| light gray | 018 |
| marble light | 008 |
| marble beige | 009 |
| marble bianco | 070 |
|
dolomite
|
310 |
| quartz | 131 |
| metallic | 021 |
| puntinella | 112 |
Price Group ||, Surface: Pearl Structure
| polar white | 400 |
| light gray | 418 |
| dark gray | 420 |
Price Group ||, Surface: Fine Structure
| light oak | 415 |
| wenge | 103 |
| meranty | 151 |
Window Sill bracket 1
Window Sill bracket 2
Window Sill ventilation profile
For fastening the indoor window sills. Each arm can be used as a support arm. The window sills are fastened with cylinder sheet screws 3.9 mm x 16 mm.
Max. bracket spacing: 800 mm.
Hole: Ø 6.5 mm.
Max. bracket spacing: 800 mm.
Hole: Ø 6.5 mm.
For fastening the indoor window sills. Each arm can be used as a support arm. The window sills are fastened with cylinder sheet screws 3.9 mm x 16 mm.
Max. bracket spacing: 800 mm.
Hole: Ø 6.5 mm.
Max. bracket spacing: 800 mm.
Hole: Ø 6.5 mm.
For covering ventilation openings.
Slot size: 7 mm × 40 mm.
Cut-out dimensions: 780 mm × 66.5 mm for 10 mm diameter mill.
Slot size: 7 mm × 40 mm.
Cut-out dimensions: 780 mm × 66.5 mm for 10 mm diameter mill.
| Material | Galvanized steel |
| Packaging Unit | 1 Piece |
| Weight | 0.280 kg / piece |
| Material | Galvanized steel |
| Packaging Unit | 1 Piece |
| Weight | 0.520 kg / piece |
| Material | Anodized / Powder-Coated Aluminum |
| Packaging Unit | 1 Pieces |
| Weight | 0.380 kg / piece |
Window Sill bracket 1
For fastening the indoor window sills. Each arm can be used as a support arm. The window sills are fastened with cylinder sheet screws 3.9 mm x 16 mm.
Max. bracket spacing: 800 mm.
Hole: Ø 6.5 mm.
Max. bracket spacing: 800 mm.
Hole: Ø 6.5 mm.
| Material | Galvanized steel |
| Packaging Unit | 1 Piece |
| Weight | 0.280 kg / piece |
Window Sill bracket 2
For fastening the indoor window sills. Each arm can be used as a support arm. The window sills are fastened with cylinder sheet screws 3.9 mm x 16 mm.
Max. bracket spacing: 800 mm.
Hole: Ø 6.5 mm.
Max. bracket spacing: 800 mm.
Hole: Ø 6.5 mm.
| Material | Galvanized steel |
| Packaging Unit | 1 Piece |
| Weight | 0.520 kg / piece |
Window Sill ventilation profile
For covering ventilation openings.
Slot size: 7 mm × 40 mm.
Cut-out dimensions: 780 mm × 66.5 mm for 10 mm diameter mill.
Slot size: 7 mm × 40 mm.
Cut-out dimensions: 780 mm × 66.5 mm for 10 mm diameter mill.
| Material | Anodized / Powder-Coated Aluminum |
| Packaging Unit | 1 Pieces |
| Weight | 0.380 kg / piece |
Lateral end cap exclusiv system 65
Lateral end cap exclusiv system 100
Lateral end cap exclusiv system 140
For exclusiv system window sill with 65 mm drop-nose.
For exclusiv system window sill with 100 mm drop-nose.
For exclusiv system window sill with 140 mm drop-nose.
| Material | Polystyrene |
| Packaging Unit | 1 Pieces |
| Weight | 0.051 kg / piece |
| Material | Polystyrene |
| Packaging Unit | 1 Piece |
| Weight | 0.081 kg / piece |
| Material | Polystyrene |
| Packaging Unit | 1 Piece |
| Weight | 0.101 kg / piece |
Lateral end cap exclusiv system 65
For exclusiv system window sill with 65 mm drop-nose.
| Material | Polystyrene |
| Packaging Unit | 1 Pieces |
| Weight | 0.051 kg / piece |
Lateral end cap exclusiv system 100
For exclusiv system window sill with 100 mm drop-nose.
| Material | Polystyrene |
| Packaging Unit | 1 Piece |
| Weight | 0.081 kg / piece |
Lateral end cap exclusiv system 140
For exclusiv system window sill with 140 mm drop-nose.
| Material | Polystyrene |
| Packaging Unit | 1 Piece |
| Weight | 0.101 kg / piece |
Window Sill connection profile for exclusiv system 65
Window Sill connection profile for exclusiv system 100
Window Sill connection profile for exclusiv system 140
Butt connector for exclusiv system 65 window sills, enables covering of the required expansion joint. Fastened from the side with particle board screws 3,0 x 30 into a cut edge, holes provided. Must be cut to necessary length at the installation site.
Butt connector for exclusiv system 100 window sills, enables covering of the required expansion joint. Fastened from the side with particle board screws 3,0 x 30 into a cut edge, holes provided. Must be cut to necessary length at the installation site.
Butt connector for exclusiv system 140 window sills, enables covering of the required expansion joint. Fastened from the side with particle board screws 3,0 x 30 into a cut edge, holes provided. Must be cut to necessary length at the installation site.
| Material | Aluminum |
| Packaging Unit | 1 Pieces |
| Weight | 0.118 kg / piece |
| Material | Aluminum |
| Packaging Unit | 1 Pieces |
| Weight | 0.120 kg / piece |
| Material | Aluminum |
| Packaging Unit | 1 Piece |
| Weight | 0.122 kg / piece |
Window Sill connection profile for exclusiv system 65
Butt connector for exclusiv system 65 window sills, enables covering of the required expansion joint. Fastened from the side with particle board screws 3,0 x 30 into a cut edge, holes provided. Must be cut to necessary length at the installation site.
| Material | Aluminum |
| Packaging Unit | 1 Pieces |
| Weight | 0.118 kg / piece |
Window Sill connection profile for exclusiv system 100
Butt connector for exclusiv system 100 window sills, enables covering of the required expansion joint. Fastened from the side with particle board screws 3,0 x 30 into a cut edge, holes provided. Must be cut to necessary length at the installation site.
| Material | Aluminum |
| Packaging Unit | 1 Pieces |
| Weight | 0.120 kg / piece |
Window Sill connection profile for exclusiv system 140
Butt connector for exclusiv system 140 window sills, enables covering of the required expansion joint. Fastened from the side with particle board screws 3,0 x 30 into a cut edge, holes provided. Must be cut to necessary length at the installation site.
| Material | Aluminum |
| Packaging Unit | 1 Piece |
| Weight | 0.122 kg / piece |
Window Sill wall claws
Cylinder sheet screws 3.9 × 16
For anchoring the window sills in the mortar bed. Sheet steel 1.0 mm, without screw.
With Phillips recessed head. 3.9 mm x 16 mm for fastening WERZALIT window sills to the brackets.
Drill a 3.2 mm diameter hole in the WERZALIT.
Drill a 3.2 mm diameter hole in the WERZALIT.
| Material | Galvanized Steel |
| Packaging Unit | 100; 500 Pieces |
| Weight 100 Pieces | 0.896 kg / PU |
| Weight 500 Pieces | 3.995 kg / PU |
| Material | Stainless Steel A2 |
| Packaging Unit | 100 Pieces |
| Weight | 0.147 kg / PU |
Window Sill wall claws
For anchoring the window sills in the mortar bed. Sheet steel 1.0 mm, without screw.
| Material | Galvanized Steel |
| Packaging Unit | 100; 500 Pieces |
| Weight 100 Pieces | 0.896 kg / PU |
| Weight 500 Pieces | 3.995 kg / PU |
Cylinder sheet screws 3.9 × 16
With Phillips recessed head. 3.9 mm x 16 mm for fastening WERZALIT window sills to the brackets.
Drill a 3.2 mm diameter hole in the WERZALIT.
Drill a 3.2 mm diameter hole in the WERZALIT.
| Material | Stainless Steel A2 |
| Packaging Unit | 100 Pieces |
| Weight | 0.147 kg / PU |
Separating cuts (side cut)
Notches (Notch outside corner)
Notch middle
Fold out the rear edge
Ventilation grille recess
Milling ventilation slots
Holes for switches (exclusiv system 140)
