compact Interior Window Sill

compact
Interior Window Sill

Straight Forward & Modern

Key Benefits

  • WERZALIT Material
  • Very slim design
  • Flush wall finish possible
  • Also available as a system window sill
  • Attractive decors to choose from

Architectural design language

With its striking chamber on the front edge and its slim appearance, the compact interior window sill shows a contemporary, straightforward look. A flush wall finish is possible.

compact

compact double profile

Standard Lengths: 6000 mm
Width:
compact
compact double profile
 
100, 150, 200, 250, 300, 350, 400, 450 mm
500 mm

Price Group |, Surface: Smooth, Semi-Gloss

white 001
marble bianco 070
dolomite 310
marble beige 009

Price Group |, Surface: Pearl Structure

polar white 400

Price Group ||, Surface: Pearl Structure

grey 418
betolit 320
grey 420
black 055
Lateral end caps
Laminate strips
Window sill ventilation profile
With overlapping edge and two chamfered edges.
Hot melt coated for hot ironing.Available in the colors: white, marble beige, dolomite, carrara, dark gray
For covering ventilation openings. Slot size: 7 mm × 40 mm.
Cut-out dimensions: 780 mm × 66.5 mm for 10 mm diameter mill.
Material Polystyrene
Packaging Unit 1 Piece
Weight  0.019 kg / piece
Material
Laminate
Packaging Unit 1 Piece
Weight 0.007 kg / piece
Material Anodised / powder-coated aluminium
Packaging Unit 1 Piece
Weight 0.380 kg / piece
Lateral end caps
With overlapping edge and two chamfered edges.
Material Polystyrene
Packaging Unit 1 Piece
Weight  0.019 kg / piece
Laminate strips
Hot melt coated for hot ironing.Available in the colors: white, marble beige, dolomite, carrara, dark gray
Material
Laminate
Packaging Unit 1 Piece
Weight 0.007 kg / piece
Window sill ventilation profile
For covering ventilation openings. Slot size: 7 mm × 40 mm.
Cut-out dimensions: 780 mm × 66.5 mm for 10 mm diameter mill.
Material Anodised / powder-coated aluminium
Packaging Unit 1 Piece
Weight 0.380 kg / piece
Window sill connection profile
Window sill wall claws
Cylinder Tapping Screws 3.9 × 16
Butt connector for compact window sill, enables the required expansion joint to be covered. Is attached to the side with a chipboard screw 3.0 × 30 on a cutting edge, holes are available. Cut to the required length on site.
For anchoring the window sills in the mortar bed. Sheet steel 1.0 mm, without screw.
With cross recess. 3.9 mm x 16 mm for fastening the WERZALIT window sills to the brackets.
Pre-drill in WERZALIT ø 3.2 mm.
Material Aluminum
Packaging Unit 1 Piece
Weight 0.094 kg / piece
Material Galvanized Steel
Packaging Unit 100; 500 Pieces
Weight 100 Pieces 0.896 kg / PU
Weight 500 Pieces 3.995 kg / PU
Material Stainless Steel A2
Packaging Unit 100 Pieces
Weight 100 Pieces 0.147 kg / PU
Window sill connection profile
Butt connector for compact window sill, enables the required expansion joint to be covered. Is attached to the side with a chipboard screw 3.0 × 30 on a cutting edge, holes are available. Cut to the required length on site.
Material Aluminum
Packaging Unit 1 Piece
Weight 0.094 kg / piece
Window sill wall claws
For anchoring the window sills in the mortar bed. Sheet steel 1.0 mm, without screw.
Material Galvanized Steel
Packaging Unit 100; 500 Pieces
Weight 100 Pieces 0.896 kg / PU
Weight 500 Pieces 3.995 kg / PU
Cylinder Tapping Screws 3.9 × 16
With cross recess. 3.9 mm x 16 mm for fastening the WERZALIT window sills to the brackets.
Pre-drill in WERZALIT ø 3.2 mm.
Material Stainless Steel A2
Packaging Unit 100 Pieces
Weight 100 Pieces 0.147 kg / PU
Separating cuts (side cut)
ABS edge coating (2 mm thick laminate layer)
Notches (Notch outside corner)
Notch Middle
Fold out the rear edge
Mitre cut
Mitre connection with slats
Ventilation grille recess
Milling ventilation slots