compact system Interior Window Sill

compact system

Interior Window Sill

The architectural Solution

Key Benefits

  • WERZALIT Material
  • Very slim design
  • Flush wall finish possible
  • Attractive decors to choose from

The architectural Solution

With its striking chamber on the front edge and its slim appearance, the compact interior window sill shows a contemporary, straightforward look. A flush wall finish is possible.

compact system 65

Standard Lengths: 6000 mm
Width: 100, 150, 200, 250, 300, 350, 400, 450 mm
Panel Height: 65 mm

Price Group |, Surface: Smooth, Semi-Gloss

white 001
marble bianco 070
dolomite 310
marble beige 009

Price Group |, Surface: Pearl Structure

polar white 400

Price Group ||, Surface: Pearl Structure

grey 418
betolit 320
grey 420
black 055
Lateral end cap compact system 65
Window Sill connection profile for compact system 65
Window Sill ventilation profile
For compact system 65 window sill with 65 mm drop-nose.
Butt connector for compact system 65 window sills, enables covering of the required expansion joint. Fastened from the side with particle board screws 3,0 x 30 into a cut edge, holes provided. Must be cut to necessary length at the installation site
For covering ventilation openings.
Slot size: 7 x 40 mm.
Cut-out dimensions: 780 x 66,5 mm for 10 mm diameter mill.
Material Polystyrene
Packaging Unit 1 Pieces
Weight 0.051 kg / piece
Material Aluminum
Packaging Unit 1 Pieces
Weight 0.100 kg / piece
Material Anodized / Powder-Coated Aluminum
Packaging Unit 1 Pieces
Weight 0.380 Kg / Each
Lateral end cap compact system 65
For compact system 65 window sill with 65 mm drop-nose.
Material Polystyrene
Packaging Unit 1 Pieces
Weight 0.051 kg / piece
Window Sill connection profile for compact system 65
Butt connector for compact system 65 window sills, enables covering of the required expansion joint. Fastened from the side with particle board screws 3,0 x 30 into a cut edge, holes provided. Must be cut to necessary length at the installation site
Material Aluminum
Packaging Unit 1 Pieces
Weight 0.100 kg / piece
Window Sill ventilation profile
For covering ventilation openings.
Slot size: 7 x 40 mm.
Cut-out dimensions: 780 x 66,5 mm for 10 mm diameter mill.
Material Anodized / Powder-Coated Aluminum
Packaging Unit 1 Pieces
Weight 0.380 Kg / Each
Cylinder sheet screws 3,9 x 16
Window Sill wall claws
With Phillips recessed head. 3,9 x 16 mm for fastening the WERZALIT window sills to the brackets.
For anchoring the window sills in the mortar bed. Sheet steel 1.0 mm, without screw.
Material Stainless Steel A2
Packaging Unit 100 Pieces
Weight 0.147 kg / PU
Material Galvanized Steel
Packaging Unit 100; 500 Pieces
Weight 100 Pieces 0.896 kg / PU
Weight 500 Pieces 3.995 kg / PU
Cylinder sheet screws 3,9 x 16
With Phillips recessed head. 3,9 x 16 mm for fastening the WERZALIT window sills to the brackets.
Material Stainless Steel A2
Packaging Unit 100 Pieces
Weight 0.147 kg / PU
Window Sill wall claws
For anchoring the window sills in the mortar bed. Sheet steel 1.0 mm, without screw.
Material Galvanized Steel
Packaging Unit 100; 500 Pieces
Weight 100 Pieces 0.896 kg / PU
Weight 500 Pieces 3.995 kg / PU
Separating cuts (side cut)
Notches (Notch outside corner)
Notch middle
Fold out the rear edge
Milling ventilation slots
Ventilation grille recess